Inflatable boats "Zodiac" are known to all who are attracted by the water element, who are somehow connected with the sea. "Zodiac" is a naval and border guard boat, a cozy house for recreation on the water, a fisherman's boat, a ski towboat and a scuba diver's base, a research laboratory of the legendary captain Cousteau and a yacht for elegant parties. The unique buoyancy and stability of "Zodiac" boats guarantee the consumer a trip without dangerous adventures, and the functional design makes it comfortable and enjoyable.

Inflatable boats "Zodiac", in addition to design features and design, are noticeably different from conventional inflatable boats, and above all the material, the high quality of which is ensured by unique technology and strict production control.

Inflatable boat "MKS2C Futura Fastroller"

Inflatable boat "MKS2C Futura Fastroller" The "Zodiac" fabric is a five-layer reinforced material on a polyester base with coatings of various types.

Fabric with Hypalon-Neopren coating is used in the production of boats for professionals, since these boats are subject to maximum loads, working in extreme conditions. The material guarantees high strength and a unique service life. Boats with HypalonNeopren coating have been manufactured by the company for a very long time and have proven themselves to be long-livers. The production technology is quite labor-intensive, since the seams are glued only by hand, and the places for future seams require careful processing for reliable adhesion. Therefore, limited volumes of special products are manufactured in this way. At the same time, production does not require expensive equipment.

Inflatable boat "Ribster 400"

Inflatable boat "Ribster 400" Fabric with PVC coating allows you to automate the process and reduce the share of manual labor. "Zodiac" has been working with this material for a long time and achieves the highest quality due to strict control at each technological stage. The seams are formed with hot air, and in some cases, for example, in places where the fabric is connected to the transom made of marine plywood, they are welded using microwave technology. The joints of the fabric with the transom plywood are additionally glued. Heat welding technology came to boat production "from the sky" - it was used in the manufacture of balloons. The automated heat welding process is the strong point of "Zodiac". It guarantees strength under the heaviest loads.

The process of manufacturing PVC-coated fabric has been brought to perfection. Plasticizers are added to the original polyester-based composition to make the fabric flexible, stabilizers - to increase durability, inhibitors that protect the boat material from destruction by ultraviolet radiation of the sun, and, of course, cosmetics for the fabric - pigments. The fabric recipe was developed by "Zodiac" specialists, and it is produced in Germany. Deviations from the recipe are unacceptable. Clarity and accuracy. Otherwise, over time, errors will cause problems. Boats made of this fabric hold pressure well (1 pumping per month), they are safe and reliable.

Inflatable boat "Futura Super Fastroller"

Inflatable boat "Futura Super Fastroller" The calling card of "Zodiac" is Strongan Duotex, a new generation of fabric, for which "Zodiac" gives a unique guarantee - 5 years! Five-layer composite with internal double reinforcement. Absolutely airtight and durable, the fabric has been tested at the molecular level. The test result - the new coating formula increases the limit of resistance of the fabric to abrasion and cuts by more than one and a half times compared to any of the known analogues. It is not afraid of snags and the infamous snags. The fabric is practically not subject to the harmful effects of the atmosphere and aggressive environments. It is safe to say that even after decades of operation, you will not see your boat cracked, faded and aged.

The most important division of "Zodiac" is testing laboratories. Every year, Zodiac uses several hundred thousand square meters of fabric, and each roll is individually tested. Samples of materials from each incoming batch are subject to incoming technical control. These are numerous tests for maximum air pressure, overall strength, resistance to abrasion and cuts. Only after receiving positive results is the material recommended for serial production. The same goes for the final stage. The boat will not be released on a long voyage without a scrupulous and merciless test cycle.